Services

Machine, mould and process under control.

We do not only sell a machine. We review the part, material, mould and process to determine whether you need TPI-Pro, a custom mould, an injection service, technical support or a complete solution.

Request an assessment for my part

Approach

The service depends on your starting point.

“Some customers need a TPI-Pro, others a mould, others an injection trial, and others want to validate a part before deciding. The key is not to force the same route on everyone.”Rafael Barrera, Project Manager

Service areas

From part to mould. From mould to part.

Services designed to support real compact injection moulding, prototyping and short-run projects.

Mould manufacturing

Custom moulds for specific parts, compatible with TPI-Pro and designed for trials, training, validation or short runs. We review the part first, then determine whether the mould makes technical sense.

Initial part review
Design and machining for the specific part
Testing and adjustment before delivery
Delivery of samples to validate geometry and finish
Options for different colours, materials and mould finishes

Injection service

For customers who want to test, validate or manufacture a part without buying a machine yet. We can work with real material, validate the part functionally and prepare samples, pre-series or short runs according to feasibility.

Injection moulding with real material
Functional part validation
Pre-series or short runs
Initial cycle, ejection and finish trials
Comparison of materials or colours when required by the project

Illustrative technical drawing on a monitor

CAD/CAM design

Technical support to adapt a part, file or sample for a more feasible injection moulding process.

Geometry review
Adaptation for injection moulding
Preparation for mould manufacture
Recommendations on demoulding, wall thicknesses and radii
Preparation of data for a technical quotation

Setup and support

Support with the machine, mould and first trials, especially when the project includes a specific part.

Initial cycle adjustment
Basic functional validation
Direct manufacturer support
Commissioning with a real part where applicable
Review of initial mould and process issues

How we work

First we understand the part. Then we decide the route.

Before making a mould or recommending a machine, we review the objective: training, validation, functional sample, short run or complete solution.

We receive your part, file or sample

STEP, STP, IGS, STL, drawing, physical sample or project description.

We review feasibility

Geometry, material, demoulding, complexity and intended use.

We propose a solution

Machine, mould, injection service or a combination of options.

We test and adjust

When a mould is involved, it is tested and adjusted before the project is approved.

A complete project

Most cases combine machine and mould.

Some customers need only the machine. Others need a mould, an injection trial or technical support. In many cases, the right solution combines several elements.

Machine onlyFor customers who already know their intended use or work in-house with TPI-compatible moulds.

Machine + mouldA typical setup for starting with a specific part and TPI-compatible moulds.

Mould + trialManufacturing and validation without buying a machine in the first phase.

Injection serviceOccasional production, samples, validation or pre-series.

Custom mould

Moulds are quoted and manufactured to order.

Each mould depends on the part, material, geometry and objective. As a custom-made product, the mould is paid for at the start of the project, and feasibility is always confirmed through technical review.

Would you like us to review your part or project?

Upload your file through the client area or tell us about your part or sample. We will advise whether a machine, mould, injection trial or complete solution is the best fit.

Request an assessment for my part